Guide :Exercise & Fitness : Kettler

Drive Belt Split Around middle

I fitted a new drive belt just over two months ago and it has now split around the middle,not across the belt. Is there a reason why it should do this?

Research, Knowledge and Information :

Split down the middle of a 4 year old serpentine belt your ...

Nothing is impossible but they rarely split down the middle. ... One of the pulleys that the belt goes around ... I just replaced the drive belt on ...
Read More At :

Serpentine Belt Splitting Down The Middle - Miller Welding ...

Serpentine Belt Splitting Down The Middle ... Ever see a belt split down the middle like ... The belt is only around a year old and I just gave the engine ...
Read More At :

Cracked Serpentine Belt Inspection on Your Car

Serpentine Belt Inspection ... truck use a serpentine drive belt. ... in between the serpentine drive belt and the pulleys. Turn the belt around and see if there are ...
Read More At :

Checking, adjusting and refitting drive belts | How a Car Works

Checking, adjusting and refitting drive belts. ... check by looking carefully all round the belt, and by feeling around the inner face for ... a split-pulley belt.
Read More At :

Belt and chain drives

What design/construction features in belt and chain drives CONTRIBUTE ... which can cause the belt to split down the middle along ... Applying a V-belt drive in a ...
Read More At :

Solutions to Belting Problems - Belt Life-span

Q23 How much should belts wrap around ... How long do urethane belts last (belt life span ... 92A tracking sleeve, located in the middle of the belt on the drive ...
Read More At :

Belt Maintenance: How to Replace a Riding Mower Drive Belt ...

Learn how to replace the drive mower belt on a ... Carefully lift the middle sheave slightly so the belt will clear the belt ... variable speed pulley and around the ...
Read More At :

V -Belt Troubleshooting Guide - Russet

V -Belt Troubleshooting Guide ... Belt Co ver Split * Belts Pried On or Misplaced Slack ... Drive Seriously Overbelted Pulley T oo Small
Read More At :

DRIVE BELTS - EBSCO Information Services

This causes the belt to slip as it travels around the ... Keep the drive belt system ... coolant or other contaminants. Accessory drive belts are of two ...
Read More At :

Suggested Questions And Answer :

Drive Belt Split Around middle

Hi, Please do not shoot the messenger! You are asking and I will tell you so please don't give me a poor rating for telling you the truth. If the belt split up the middle the tension was too tight. The tension bars are not exactly round but thicker in the middle to aid in tracking, and if the tension is too tight, that thicker area is where it will stress fracture. Sorry, but now you know for the next one. The correct tension would be just after it quits slipping. Good Luck this should Fixya!
Read More At : Kettler...

Need to replace the drive belt on my Schwinn 430 Elliptical

Http:// Follow this link for step by step instructions. Note you will need a crank puller which you can purchase at most bike shops. remove both covers then crank weldment(discs).
Read More At : 430 Elliptical Trainer...

Healthrider 500sel When Iam walking or running around 5mph, the belt is jerky and stops as I put my foot down. I have checked the belt and it seems tight as per the manual. I took the motor cover off and watched the motor while I was walking and it looks like the connection between the motor and belt stops. Is there a cluch adjustment? The motor keeps running but the drive stops on every footstep

B) Walking Belt/Motor Belt too Tight: If you have adjusted the walking belt or motor belt recently, check for this problem. When the belts start slipping, some people just crank down the belts and on treadmills, tighter is not necessarily better. The tighter the belts, the more the drive system has to work to keep everything moving. You should be able to lift the walking belt (with the treadmill unplugged) in the center of the treadmill about 3" without straining. Tighter belts should be loosen but make sure you don't create a dangerous slipping situation by loosening. The motor belt (with the treadmill unplugged) should be able to be turned by hand to almost a 90 degree angle from its normal operating position. Loosen the belt if too tight. Make sure to test for slipping and if it does with the proper tension, replace the motor belt. sincerely. E. CUADRA
Read More At : Exercise & Fitness...

I have a Kettler Condor Elliptical and when I use it I am getting a squeeking sound from around the wheel area (like a belt is misaligned??). Any ideas? I am afraid of taking anything apart, so at this point I have done nothing to try to fix it.

Do you still have your manual? I kind of remember running into this, I think it was something simple( sorry I can't recall!) like lubrication or uneven alignment (fixed by adjusting the feet). I don't see the condor on the kettler USA site, but they still may be able to help.
Read More At : Kettler...

Is is possible to replace a snapped belt in the kettler CTR 2 eliptical trainer? this literally just happened and was in the middle of my workout. I need help with this really quickly because I am on a strict fitness programme of my own design and I use the trainer to workout for 3 hours a day and without it well lets just not go there shall we. Any help would be much appreciated!

Yes it is and the parts and the installation manual can be found at the link provided Thank you
Read More At : CTR2 Elliptical Trainer...

We have a 590t that is @ 2 months old. It has gradually developed a clicking noise that is most noticeable at lower speeds. I called the company and was advised to remove the drive belt to see if it still made the noise. I did that and plugged it in and the motor did not make the noise, but when I turned the waling belt by hand the clicking noise was still there, even without the drive belt being on. So I know that its not the motor or drive belt, although now I can't seem to get the drive belt back on, either. Any suggestions would be welcome. Jeff

Hey Jeff, You will have to loosen the 2 bolts that hold the drive motor on to the frame, then stretch the drive belt and rotate the flywheel until is fully engaged on the pulley then tighten the bolts. Hope this helps
Read More At : 590T Treadmill...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.0459 seconds