Guide :Exercise & Fitness : L7 LTd Pro Sports Trainer Treadmill

Landice L7 Sport Trainer stops and restarts randomly

After walking or running for a little while, it will slow down or stop all together and then restart. A red LED on the board with "SPEED" beside of it blinks once, as the motor surges back up to the set speed. The motor isn't hot at all, so I don't think it's overheating. Could there be a overspeed protection device that's bad?

Research, Knowledge and Information :

Landice L7 Pro Sport Trainer Treadmill - At Home Fitness

The Landice L7 Pro Sport Trainer is one of the more basic models in the L7 series, ... Some even stop elevating. ... Landice L7 CLUB Pro Sport Trainer Treadmill
Read More At :

Landice - Official Site

The Elliptical Trainer . New, Low Price . BUY NOW. ... Landice has built a living legacy of success by building the world’s most durable, ... L7 Treadmill. L8 ...
Read More At :

Landice L7 80 LTD Pro Sport Trainer Treadmill - At Home Fitness

The L7 80 LTD Pro Sport Trainer Treadmill is a good option for ... Some even stop elevating. • Our ... Be the first to review “Landice L7 80 LTD Pro Sport Trainer ...
Read More At :

Landice L7 Manual -

Landice L7 Manual View and Download Landice Cardio ... on Treadmill has been randomly not ... The 58-inch deck may Landice L7 LTD Pro Sports Trainer ...
Read More At :

Landice Product Manuals | Treadmills, Ellipticals & Bikes ...

Everything You Need to Know Download PDFs of your Landice Owner's Manuals and our ... L7 Treadmill. L8 ... R7 Recumbent Bike. U7 Upright Bike. E7 Elliptical Trainer ...
Read More At :

Landice L8 LTD Cardio Trainer Treadmill - At Home Fitness

Landice L8 LTD Cardio Trainer ... The Landice L7 Cardio trainer treadmill is the ... Awards were bestowed following an online random sample polling of 20,000 ...
Read More At :

Free Landice Treadmill User Manuals |

Find the personal fitness user manual you need at ManualsOnline. ... Landice Owner's Manual Treadmill 72071. ... Treadmill will not increase in speed and stops whi...
Read More At :

Treadmills - TheraTek

Landice Treadmills have over 35 years field ... * Remote start stop switch is optional making it ideal for ... L7 LTD Treadmill w/Sport Trainer ...
Read More At :

Suggested Questions And Answer :

Landice L7 Sport Trainer stops and restarts randomly

No its the problem od motor connections on the board which gives command to the motor to spin that is faulty as getting loose.just remove that connection and refit it properly firm and tight.
Read More At : L7 LTd Pro Sports Trainer Treadmill...

Overspeed - Landice L7 LTd Pro Sports Trainer Treadmill

Your speed sensor is not working properly this part is located under the motor shroud and on top of drive motor it is attached to a bracket with 2 bolts. Unplug the unit and remove motor shroud see if you can adjust it first by loosen the 2 nuts and moving the sensor forward without making contact to the flywheel, then tightened the nuts up. Plug the unit into the outlet, start the unit, if you still have the overspeed then replacement of the sensor is needed. Call Landice Directly they will ask for model and serial number and they will the new sensor.
Read More At : L7 LTd Pro Sports Trainer Treadmill...

I need instructions for a LANDICE L7 LTD PRO SPORTS treadmill

You can get the manual on link below.
Read More At : Exercise & Fitness...

TURN ON A CODE L5 LIGHTS UP - Landice L7 LTd Pro Sports Trainer Treadmill

L5 is really LS (Lose signal ) this occurs when the speed sensor is not functioning or no belt movement. Unplug unit remove motor shroud then plug unit back in, now stand on foot panels you will notice LED lights coming from the Motor Control Board, press start at this time you will manually with you foot start pushing the belt. What this will show you that if the speed sensor is working properly one of the lights will start flickering and the upper panel will register this pulse signal and the time should work. If you get a LS again then the speed sensor is defective and needs to be replaced, this sensor is located on top of the drive motor with 2 bolts attaching it to the motor body. Now if the sensor is functioning their is 2 other possibilities 1) Worn motor brushes 2) Motor Control Board Has Failed.Unplug Unit. The easiest to test out of the 2 is the motor, by using a 18v fully charged drill battery disconnect the lead from the motor going to the motor control board attach the leads to the battery and the motor should start to rotate if not replace worn brushes. If the motor rotates then you may have a defective motor control board. To test this portion you will need a multi-meter place leads where you disconnected the motor leads put meter range @ 20v DC plug in unit and start the unit, when you hear the click you should see about 5v DC = .5 MPH and their should be another LED light flickering as soon as you hit the start key this is the PWM signal which is generated from the upper board and travels thru the terminal harness. This tells you that both board and harness is working properly. My suggestion is that it is either the sensor or the brushes these are the 2 that commonly fail.
Read More At : L7 LTd Pro Sports Trainer Treadmill...

Loss of speed sensor - Landice L7 LTd Pro Sports Trainer Treadmill

Speed sensor ir sensor wiring is bad
Read More At : L7 LTd Pro Sports Trainer Treadmill...

I have just purchased a Landice P 7 Pro Trainer and notice that a light is constantly on in the front part of the machine where the motor is located. Is this normal? Also, I am having difficulty inputting weight and grade before I start the various programs. The accompanying manual is for the birds in its explanation. thanks, Mark

If no error number as "L5" should work well, with respect to the LED light is normal if you have more questions please send me a E-mail to [email protected] I have the technical manuals, I will be going up soon
Read More At : L7 LTd Pro Sports Trainer Treadmill...

Landice treadmill 05 error code comes on when i hit start

LS Error on Landice L-Series Treadmills with Belt Movement Probable Cause A LS error on the Landice L-Series treadmills can also look like L5 and this error code means there is a loss of speed signal. This error can occur with belt movement but speed will not increase. Causes for the LS or L5 error with belt movement are:A) Speed sensor is out of adjustment B) Speed sensor is damaged or faulty C) Display cable is damaged or faulty D) Improper speed control wiring Corrective Action A) Speed sensor should sit parallel with the flywheel and gap between speed sensor and flywheel should be within 1/16". Adjust speed sensor if necessary. B) Inspect speed sensor connector to relay board. Check for pushed pins or loose wires. Repair or replace speed sensor assembly if necessary. C) Inspect upper harness or display cable connector to relay board. Check for pushed pins or loose wires, giving specific attention to pin 5 (brown) and pin 9 (green). Repair or replace display cable if necessary. D) Inspect speed control wiring: Checking purple wire from V+ on pwm board to P3 on the relay board Checking orange wire from P1 on pwm board to P1 on the relay board Checking brown wire from P2 on pwm board to P2 on the relay board Confirm P3 on pmw board has no connection Correct speed control wiring if necessary. Details about LS Error on Landice Series Treadmills with Belt Movement
Read More At : L8 LTD Pro Sport Trainer Treadmill...

Treadmill does not start

Is a problem with the speed sensor or card connectors are specifically where the motor cables is false or welding is damaged if you can not check you should call a qualified technician to review these two parts and repair.
Read More At : L7 LTd Pro Sports Trainer Treadmill...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.1063 seconds