Guide :Exercise & Fitness : View 550 Treadmill

The Incline is stuck at an angle

My wife use the epic view 550 treadmill and she stop the treadmill at an incline of 4 OR 5. Now the incline is stuck at an angle and will not change or go back to zero.

Research, Knowledge and Information :

geometry - Finding angle on an inclined plane - Mathematics ...

Finding angle on an inclined plane. ... Then the vertical angle theorem proves the vertical angle to be 60deg as well. I am stuck at this point. How can I find theta?
Read More At :

What is the best angle for incline bench press? - Quora

What is the best angle for incline ... to one angle or one exercise for the development of any muscle group. You shouldn't be stuck on a single angle as it ...
Read More At :

Inclined plane force components (video) | Khan Academy

Ice accelerating down an incline. Force of friction keeping the block stationary. ... If you were to measure this angle right over here, you would get theta.
Read More At :

Incline Bench Press - What angle? |

Incline Bench Press - What angle? ... Just get stuck into some serious benching, ... I always do my incline press on the 1st notch up from the bench being flat, ...
Read More At :

Stuck on a wagon and incline - Ask Me Help Desk

The tow rope is parallel to the incline and has a tension of 140 N ... Stuck on a wagon and incline. ... Weight of load Coefficient of Friction Angle of Incline
Read More At :

Tag: stuck - NordicTrack

Serving you for over 20 years ... Folding Your SpaceSaver Elliptical Into the Storage Position
Read More At :

Mass on an Incline | Physics Forums - The Fusion of Science ...

A block with mass m1 = 9.2 kg is on an incline with an angle θ = 25.0° with respect ... I've probably been stuck for hours on this one part on ... Mass on an Incline.
Read More At :

My nordictrack treadmill is stuck at 12% incline. I have

My nordictrack treadmill is stuck at 12% incline. I have - Answered by a verified Exercise Equipment Technician
Read More At :

Suggested Questions And Answer :

The Incline is stuck at an angle

Check the motor and the gears that run the unit up and down. If is located on the front of the unit under the face plate. make sure everything is power everything. Also check the gears to make sure they did not break and check the tracks to make sure it did not fall off the track causing it to stay up
Read More At : View 550 Treadmill...

The incline setting on my Proform 550 Epic View is all the way up to 12% and will not go down. I can hear the motor working when I press another incline setting but it does not go down anymore. The monitor displays the incline at 0%. When I click on the incline down button a few times it shows 12% and the monitor goes down to like 9% and then resets to 0% and will not go down at all. The motor for the incline seems to be working as I hear it trying to work..but it does not go down. What is wrong?

The incline adjustment is done this way in your machine: a motor is attached to the platform with a hinge; at its shaft is attached a worm screw; on it there's a threaded bushing which is attached to a lever situated on an rotating shaft - when the motor turns the bushing is moved up the worm screw which pushes on the lever which rotates so it lifts the platform If you can hear the motor turning but nothing happens it means that this mechanism is faulty: 1 - the connection between the motor shaft and the screw has broken - fix it2 - the friction in the bushing and the joints is too much for the motor - clean and oil thoroughly the entire mechanism3 - the screw or the bushing are damaged - replace them.Unfortunately finding replacement part will be difficult -this is an older model that is no longer in production.
Read More At : View 550 Treadmill...

The treadmill is stuck on "incline." Any time we put the red key on it to turn it on, it just keeps moving up and down from 0 incline to 10. It does this over and over again without stopping. No buttons respond.

I can't solve this, but my Nordic Track T5 zi occasionally does the same thing. The previous two times, I waited until the unit "bottomed out", and then pulled the mag switch (key) off. I unplugged the unit, then plugged it back in, attached the key, and all was well. This worked twice before, but today (3/8/2011)the unit's incline is cycling again, and the old fix isn't working. Maybe it will need to go back to Sears! Unit was purchased in October of 2010. Frustrating.
Read More At : NordicTrack T5 zi Treadmill...

Image 17.0 Treadmill is stuck in incline position and will not go down. I do not plan to use the include at all, is there a manual way to move the incline to 0? Any suggestions?

Hello there, The first thing I would try is to calibrate the incline on the unit. Do this using the following procedure. With the safety key out, press the stop button along with the speed up button while inserting the safety key onto the unit. remove your fingers from all buttons, Then press the stop button one time. Now press the incline up button one time. The unit should go all the way to the top, then return to the bottom. Remove the safety key and reinsert it to continue using the machine If this does not work you can manually move the machine to the bottom using this procedure. Remove the hood cover b removing 2 screws in the rear of the machine and removing the first 2 screws on the foot rails on each side. You can now lift the cover out of the way. At this point you will see the incline motor located in the center of the unit pointing in a downward direction. On the top of the motor there will be a small fan encased inside of a metal cover. There will be a flat head screw located inside the metal frame where the fan is. Rotate this clockwise to lower the unit. (the motor is geared very high it may not seem as though it is moving but it is) be patient that procedure does take a little while. Any questions please feel free to leave another message on this link. Good Luck! Tim
Read More At : Image 17.5 S Treadmill...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.1311 seconds