I have a Reebok Vista treadmill that has NOT been used that often. We turned it on the other day and the only button that worked is the start. We could not change the speed or the incline etc. Any ideas as what to do?
Dear Sir:I will help you inmediately:
Check the circuit breaker to see if it hastripped. If the reset/off circuit breaker has tripped, wait 5 minutes andreset.
If the power cord is properly plugged in, unplugit and wait 5 minutes before plugging it back into the surge protector.
Remove and reinsert the console key.
4)Remove the key from the console and UNPLUG THEPOWER CORD.5) Next, remove the screws from the hoodand carefully remove the hood. Locate the Reed Switch and the Magnet on the left side of the Pulley .6)Turn the Pulley until the Magnet is aligned with the ReedSwitch. Make sure that the gap between the Magnetand the Reed Switch is about 1/8". If necessary, loosenthe indicated Screw , move the Reed Switch slightly,and then retighten the Screw. Re-attach the hood and runthe treadmill for a few minutes to check for a correct speedreading.Thank you in advance,blessing, if you need some additional assistance please reach me. sincerely.E.CUADRAManagua, Nicaragua. C,A Read More At : Vista Treadmill - RBTL13305...