Guide :Exercise & Fitness : AW200 Activity Watch

After resetting, display shows "Error 9999"

After using "stop" button , I can scroll "up" or "down" to "internal test", "default settings", "activate sleep", "usage counters", "monitor". Time mode is not accesible. Changing battery does not help. I can put it into sleep mode and wake it up. That is it. Thank you.

Research, Knowledge and Information :


How do I reset default display settings - Microsoft Community


How do I reset default display settings GO. goducks1 ... Let me rephrase How Do I Reset My Display Settings to the Default Settings that were ... Show more content ...
Read More At : answers.microsoft.com...

All phone reset codes - Mobile Phone Repairing Complete Course


All phone reset codes All China. ... *#06#=Displays IMEI NO. *#9999#=SW Version. *#8888#=HW Version. ... Reset On Fatal Error
Read More At : fmtmobile.blogspot.com...

Fitbit Ultra - Troubleshooting - Client - Retrofit Wiki


Fitbit Ultra - Troubleshooting ... Why do I get a "dongle error"? Timer Displays and Steps are Incorrect; ... Reset Procedure:
Read More At : wiki.retrofitme.com...

Black Screen, 7 Beeps, after resetting BIOS - Tom's Hardware


Black Screen, 7 Beeps, after resetting ... the motherboard and black screen after resetting the cmos; solved No display, ... doesn't shows up after removing ...
Read More At : www.tomshardware.com...

PC stuck at black screen after reset - Windows 10 Forums


PC stuck at black screen after reset i did ... stuck at being a black screen.i tried rebooting but it just goes back to a black screen after showing the blue ...
Read More At : www.tenforums.com...

Phone Does Not Go Into Factory Reset Mode (Hard Reset ...


Phone Does Not Go Into Factory Reset ... the lg logo then shuts of and shows it ... the LG sign comes on and the booting error screen comes on then ...
Read More At : www.ifixit.com...

Nvidia Gefore issue after resetting Windows 10 - Graphics Cards


Nvidia Gefore issue after resetting Windows 10. ... solved "Inaccessible_boot_drive" error after resetting windows 10; ... Windows 10 display problem after resetting pc;
Read More At : www.tomshardware.com...

Troubleshooting a Blank Screen TV or Monitor While Your Xbox ...


Find a number of troubleshooting tips if you are getting a blank screen on your TV or if your monitor shows ... Troubleshooting a blank TV screen ... To reset this ...
Read More At : support.xbox.com...

Resetting Your Monitor To The Factory Defaults


Troubleshooting Guide. Print Email Close. Home > Display or Screen > Resetting Your Monitor To The Factory Defaults Last Updated on 10/20/2014.
Read More At : support-us.samsung.com...

Suggested Questions And Answer :


After resetting, display shows "Error 9999"


This link will answer all your questions...scroll down about halfway to customer info click on and then scroll the rest os thw way down....I hope this helps. http://www.heartratemonitorsusa.com/Pages/TRANSMITTERS/T31-coded.html
Read More At : AW200 Activity Watch...

My Powerfirst T960 stopped twice while running. Display stays on (no error message) but backlight turns off. Also, was speeding up/slowing down while running


1)LUBE THE DECK BELT, this problem is by lack of maintenance schedule, maybe you have deck belt worn. This produce enough friction between deck vs deck belt and shut down the machine for protect the electonic system.2) Lube the rollers bearing in according with the maintenance schedule.3) Test the voltage input motor, if there are the motor need repair.4) Test the output voltage board, for the input voltage motor, if there are NOT the board si faulty.5) RUN the software calibration for diagnose, troubleshooting and fix it.see my person TIPS for help.sincerely. God bless you
Read More At : Exercise & Fitness...

Proform elliptical 820 left sitting for months in florida room but worked fine before, batteries replaced, now the rpm's don't show and programs won't start. i have a feint memory of havin


1) replace by new batteries with the same type fulll charge, with the same mark, with the same polarity2) clean the contacts batteries with contacts cleaner for a dirty, corrosion, etc 3) adjust the REED switch, test it, clean it, and tight any plug or connector.4) tight the ribbon cables for keypads good connection.Try again.Of course you must know the power cord is o.k the c. breaker you must reset and some fuse is o.k o replace see the b.diagramGod bless you
Read More At : Exercise & Fitness...

The incline setting on my Proform 550 Epic View is all the way up to 12% and will not go down. I can hear the motor working when I press another incline setting but it does not go down anymore. The monitor displays the incline at 0%. When I click on the incline down button a few times it shows 12% and the monitor goes down to like 9% and then resets to 0% and will not go down at all. The motor for the incline seems to be working as I hear it trying to work..but it does not go down. What is wrong?


The incline adjustment is done this way in your machine: a motor is attached to the platform with a hinge; at its shaft is attached a worm screw; on it there's a threaded bushing which is attached to a lever situated on an rotating shaft - when the motor turns the bushing is moved up the worm screw which pushes on the lever which rotates so it lifts the platform If you can hear the motor turning but nothing happens it means that this mechanism is faulty: 1 - the connection between the motor shaft and the screw has broken - fix it2 - the friction in the bushing and the joints is too much for the motor - clean and oil thoroughly the entire mechanism3 - the screw or the bushing are damaged - replace them.Unfortunately finding replacement part will be difficult -this is an older model that is no longer in production.
Read More At : View 550 Treadmill...

My Freespirit also stops after a few minutes


Normally all these problems are in relation with motor itself, I mean, internal bearings, short circuit. So if your treadmill stops is bacause the circuit board detetecs an over current fron motor. I hope help you
Read More At : Treadmill Series 7...

Nordictrack COmmercial 1500 console buttons don't work


Http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnessincerely. Please keep me in touch.
Read More At : NordicTrack Commercial 1500 Treadmill...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.fitness-equipment-plus.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0884 seconds