Guide :Exercise & Fitness : NordicTrack A2350 Pro Treadmill

Treadmill Incline Works, belt does not move

I recently moved.  Since then, having problems with my treadmill.  When the key is inserted, all lights go on and the incline works fine, but when you press start to start walking, the belt does not move.  The readout looks like you are walking at whatever speed it is set to (1mph, 2mph, etc), but the belt doesn't move at all.  Could something have been broken in the move?  Thanks.

Research, Knowledge and Information :

The Treadmill Belt Won't Move | LIVESTRONG.COM

Sep 10, 2015 · The Treadmill Belt Won't Move. ... A treadmill belt can shift to the right or left ... You may void the warranty if you attempt to work on the motor ...
Read More At :

3 Easy Ways to Fix a Treadmill (with Pictures) - wikiHow

How to Fix a Treadmill. ... Do not work on a treadmill while it is connected to a power source. You could be electrocuted or the treadmill belt could begin to move ...
Read More At :

Incline Motor Problems - Treadmill Doctor

Incline Motor Problems. ... if that is the problem and then reinstalling it in the treadmill will get it to work. ... If the incline motor does not move, ...
Read More At :

I need treadmill help! Proform xp 550e. Belt won't move...but ...

Jan 03, 2014 · Absolutely everything works with this treadmill except the motor wont turn over. But it will turn when hooked up to a 18v battery. Any suggestions? Incline ...

Treadmill Troubleshooting - NordicTrack

If this does not work or your console does ... Move the tip of the reed ... The belt stops when I'm walking on the treadmill. If the belt starts again ...
Read More At :

Proform treadmill will not run | Sears PartsDirect

Proform treadmill will not ... and it still didn't work,so then I checked the power ... belt does not move but the incline will still go up and down ...
Read More At :

Exercise Equipment Troubleshooting | Horizon Fitness

All or some of the keys on the console do not work. ... Incline motor issues Unplug the treadmill from the outlet. ... My running belt does not move.
Read More At :

Hi I have a Horizon treadmill. The belt on it will not move

How JustAnswer Works: ... Hi I have a Horizon treadmill. The belt on it will not move round, ... Even though you can not get it to move, does the incline work?
Read More At :

Suggested Questions And Answer :

Treadmill Incline Works, belt does not move

Check the drive belt. It may be loose or broken. If the belt is loose, then to tighten the drive belt, start by removing the front cover. loosen the bolts around the motor then tighten the drive belt by tightening the motor adjuster bolt. Once the drive belt is tight, tighten the motor back down.
Read More At : NordicTrack A2350 Pro Treadmill...

Belt moves for split second then stops

I can help you once I get mine turned on, but when I turn mine on at the reset switch the display flashes for a split second and doesn't turn on. My question is does the screen light up with the key in or out? Or does the key have to be in for the display to be on? Thanks.
Read More At : NordicTrack A2350 Pro Treadmill...

Nordic Track A2250 Pro stuck inclined

My Nordic Track Treadmill A2250 is stuck on the 12% incline position and it wont go back down and I have tried to reset it by turning it off, switching the reset button to off and then on or even unplugging it several times. What would be my next move?
Read More At : NordicTrack Treadmill, A2550...

Nordictrack Commercial 1500 treadmill w/working display BUT unresponsive buttons

Sounds like a cable harness is undone. The cable feeding the panel which has the computer inside (the power feed) is connected, but the cable from the panel back to the motorized parts isn't. The breakaway is a separate circuit that cuts all power to everything. These are my assumptions (I'm not a nordic track expert), but it's a pretty safe bet, likely the connector in the bottom section. Okay, I just looked it up, first Google "nordictrack 1500 manual" one of the first links is a PDF, with a complete parts breakdown. Depending on your specific model, it looks like there is a connector under the top panel where it meets the right post (and a couple of screws will let you lift it up to check it). It may be partially unplugged, check that first since it looks pretty easy to check. But I think it's going to be in the bottom, in the bottom of the treadmill the wiring splits to different sections. The motor/incline controller cable (a separate cable #106 on one model I looked up, something like NTL09707 or similar) is probably the one that is either broken or unplugged. So although the computer (up top) is sending signals, they aren't reaching where they need to. Anyway, get that manual, and someone handy with screwdrivers and technology, and they should have it figured out quickly.
Read More At : NordicTrack Commercial 1500 Treadmill...

My T81 treadmill quit working. All of the lights and bells and whistles all work but the belt doesnt move and the incline doesnt move. Ive only had it for about 2 years. It was working fine before I moved it across a few states. When I unpacked it and turned it on the lights and fan and sounds all came on but the belt wont turn and the incline doesnt go up or down.

You need to check voltage going to the motors. no power ,the contoller board is not working. check the connections on the boardmake sure they are in all the way,also the power connections
Read More At : T91 Treadmill...

Unit powers on but belt won't move (motor problem?)

You problem is with the motor controller. If everything works but belt want turn 99% of the time it's the motor controller. Call if you'd like more information. 404.456.2327
Read More At : /proform Treadmill Drive/motor Belt 118016...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.1224 seconds