Guide :Exercise & Fitness : Exercise & Fitness

Power ramp does not work.

I unpacked and set up a new Sole E95 Elliptical machine. The assembly went without a hitch, but when I powered it up, the console displayed the message, "Ramp error -- press stop to enter idle mode." And, yes, the ramp won't go up or down. There are three wires and a small three-wire plug that need to be joined together to connect the front of the unit to the ramp motor and sensors in the rear. I checked that these are correctly plugged together. No joy.Any help would be much appreciated as Sole hasn't bothered to call me back.

Research, Knowledge and Information :


- Safety: Because the Power Ramp does the work, Power Ramp increases the safety of both users and caregivers. There is no risk of anyone slipping, losing control, or ...
Read More At :

Loading Dock Levelers and Equipment | Poweramp

Poweramp manufactures premium loading dock ... Portable Steel Yard Ramp; Powerlift ... Our dealership network sales force can work with you to find the leveler and ...
Read More At :

Work on a Ramp - YouTube

Nov 28, 2006 · Calculating the work needed to move something up a ramp, ... Work on a Ramp Thomas Altman. ... Work, Energy, and Power (6 of 20) Inclined Plane ...

Wheelchair Ramps | Scooter Ramps | Power Wheelchair Ramps ...

Folding Ramps, Van Ramps, ... if you have someone propeling you or if you're using a scooter or power wheelchair, the ramp length could be significantly shorter.
Read More At :

Powerpull Wheelchair Ramp Assistant| MobilityWorks

In addition to the remote control stopping capabilities, if the wheelchair is not going up the ramp straight, ... Stop the POWER PULL while on the ramp at any time;
Read More At :

Owner’s Manual - Wheelchair Vans - Rollx Vans - Handicap Vans

Rollx Vans will work with many repair facilities. ... If manual ramp operation with power override does not work ... key ON if your wheelchair is not locked securely
Read More At :

The incline ramp on my nordic track cx 998 eliptical will

Hello, If the elliptical exerciser's ramp does not function properly, press one of the 1 Step Ramp buttons; while the. ramp is moving, unplug the power cord.
Read More At :

How to Reset My NordicTrack Elliptical | LIVESTRONG.COM

Jul 19, 2015 · How to Reset My NordicTrack Elliptical. ... foldable units and incline power ramps. ... Elliptical Resistance Is Not Working 4.
Read More At :

Mega 2560 won't power up from external power supplies...

My Mega 2560 R3 was working fine up until yesterday, ... I'd just hook a 12volt car battery to the Ramps power input, and both it and the Arduino would work fine.
Read More At :

Suggested Questions And Answer :

Console buttons do not work

Go inside the panelTake the power connector off that is connected to the circuit board and plug it in different types of ways left side in first You will notice the display in the front will come onAs you try different positions on the connector hit the speed button every time you move itNow placed the connector back on but don't put it on all the way still continue to hit the speed button after a few times you will hear this speed button beep Now pushed the connector in all the way Problem solved
Read More At : Exercise & Fitness...

Treadmill (Vision Fitness T8500) turns on, motor doesn't run...

Open motor shroud and inspect all connection on the motor control board see if all LED 's are lit except that light up when incline motor is moving up or down. then check the two connector coming from the drive motor to the board sometime over time the two connector will have a cold soldier I would move them to see any excessive movements of the pins then hit start and see if there is any belt movement. Last but not least unplug unit and check the motor brushes if they are less than 3/8 in in length replace them. Call them @ 1-800-335-4348 they under their parent corp. Johnson fitness.
Read More At : Exercise & Fitness...

How do I get an exercise bike display to work ?

We would be happy to help, what type of bike do you have? If you have the model and serial number we can narrow the search to the problem even better :)
Read More At : Exercise & Fitness...

Nordic T20 Works for 25 minutes then stop working.Circuit board led comes on, but no consol power and no function at all. I do not have circuit diagram to fault find. Thank you!

Hi There, well, it sounds like your motor control board is failing due aging capacitors. Using the unit like this can lead to complete failure and possibly costlier repairs. You can find repairs and refurbs for treadmills by emailing gregATbuyfitnessrepairpartsDOTcom as well as for additional help. There is a power supply circuit on the control board that provides power to your console, if your console goes dead, as in no lights or beeps, the power supply is failing when warmed up. Good Luck!
Read More At : Exercise & Fitness...

Treadmill (Nordictrack T9si) stopped suddenly... Power still being received by controller unit, but display doesn't stay lit so nothing functions

Open up the control console and look for loose wires... if no loose wires are found, call CoreCentric Solutions and ask if they refurbish that control board... CoreCentric Solutions Reverse Logistics Core Collection and Recovery...
Read More At : Exercise & Fitness...


Read More At : Exercise & Fitness...

Treadmill screen won't show anything

If you wish to get some details about treadmill repair ; visit the site linked here. Pull up older posts.
Read More At : Exercise & Fitness...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.1703 seconds